Smooth Fiberglass Entry Door Slab (3 Panel Craftsman)

The Pease Fiberglass Door. Replace just your door slab and keep your existing jambs and brickmold. A perfect replacement for Pease (carbon & steel) doors as well as most entry doors by Stanley, Taylor, Mastercraft, Perma Door, Castlegate, Masonite, Therma Tru, Jeld-Wen, Plastpro, and many others. Please make sure to check your measurements (door height, width, and thickness) and feel free tocontact uswith any measurement or fit questions.

Modern 3 panel Craftsman style provides a great balance of light and privacy in an entryway. Additional glass options can be found in our door glass section.

Sizes & Measurements:

Style:3 Panel Craftsman

31.75" x 79":

• Slabwidth:31.75"(referred to nominally as a 32", 2/8, or 2-foot-8-inch-wide door)
• Slab height:79.0"(referred tonominally as an 80" or 6' 8" tall panel)
• Panel Thickness: 1.75"
• Select: With Glass: Clear 1 Lite (installed), With Glass: Clear 3 Lite (installed),With Glass: Clear 6 Lite (installed),With Glass: Portland Lead/Patina Finish (installed), Saxon Nickel Finish (installed), Saxon Lead/Patina Finish (installed) Clear 3 Lite (installed),or Without Glass: 23" x 16.25" Cut Out (takes Standard 22" x 15.25" Craftsman size glass in our door glasssection)

35.75" x 79":

• Slabwidth:35.75"(referred to nominally as a 36", 3/0, or 3-foot-0-inch-wide door)
• Slab height:79.0"(referred tonominally as an 80" or 6' 8" tall panel)
• Panel Thickness: 1.75"
• Select: With Glass: Clear 1 Lite (installed),With Glass: Clear 3 Lite (installed),With Glass: Clear 6 Lite (installed),With Glass: Portland Lead/Patina Finish (installed), Saxon Nickel Finish (installed), Saxon Lead/Patina Finish (installed) Clear 3 Lite (installed),or Without Glass: 26" x 16.25" Cut Out (takesWIDE25" x 15.25" Craftsman size glass in ourdoor glasssection)

Prep & other specifications:

• Select eitherNo Hinge or Lock PreporHinge & Lock Prep:
• No Hinge or Lock Prep: allows for lock placement as desired and hinge sideedge unfinished and can be mortised for hinge placements as needed
• PEASE Standard Hinge & Lock Prep 79" tall doors:
• Hinge mortise (cut out) 6.5" from top of door to top of first hinge, 37.5" to top of second hinge, 68.5" to top of bottom hinge
• Tubular lock prep comes for 2 3/8" backset lockset and means the door will have two 2.125" holes 5.5" apart, each hole 2 3/8" from the center of the hole to the edge of the door, with the top hole center 40.375" from the top edge of the door
• Trimming: Can trim up to 2 inches off bottom, then we recommend sealing thoroughly with caulking and capping with a U-style doorsweep. Sides and top are not trimmable. This is a replacement for most entry doors (front, kitchen, side, garage/man door, etc.) and can also often be trimmed and used as a replacement for patio doors which are typically shorter in height (contact us to discuss if you need a door that requires more than 2 inches of trimming off bottom)